La nuova BBS è in fase Alpha. I post precedenti al 22 luglio 2024 potrebbero non essere trasferibili, ma rimarranno disponibili per la lettura su /old/.
Today we are epoxying the forward water tank/settee in the Nook++.
-
Today we are epoxying the forward water tank/settee in the Nook++.
I find the timing, mess and stickiness stressful.
Still we have got the first part assembled permanently. Now just the sections of framing to connect the aft edge to the hull left. Then we can start fitting the two plywood sides. The inboard one is ready. The aft side still needs to be cut.
After that we can fibreglass tape all the inside edges and then lay fibreglass cloth on the hull and sides. -
And of all the stressful bits getting epoxy on your tools like levels, impact drivers etc is one of the very worst.
-
G gustavinobevilacqua@mastodon.cisti.org shared this topic on
