La nuova BBS è in fase Alpha. I post precedenti al 22 luglio 2024 potrebbero non essere trasferibili, ma rimarranno disponibili per la lettura su /old/.
First try at brazing using the gas torch and flux rather than the tig.
-
First try at brazing using the gas torch and flux rather than the tig.
It's so slow. Like 1/10 the speed of tig brazing. I have better control of where the brazing fillet goes with gas.
People online are all painting flux on the joint but this says heat the rod and dip it in the flux and that seemed to work. I'll try dissolving some of this in alcohol and putting it on the joint the way I do with silver solder, next. -
G gustavinobevilacqua@mastodon.cisti.org shared this topic
