It's currently 6 degrees outside and we'll drop to 3 overnight. In #Canberra.
It's the wrong November, Gromit!
It's currently 6 degrees outside and we'll drop to 3 overnight. In #Canberra.
It's the wrong November, Gromit!
A small but significant update to my heat-set insert press jig today, inspired by the parallelogram arm Marius Hornberger built to support his CNC machine's control panel.
Offsetting the link mounts allow the mechanism to fold flat - not only does this look neater, it will also make it trivial to design a magnet clip to safely lock the thing up and out of the way when not in use.
Obvious in hindsight but not something I came up with - this is why I watch all kinds of #maker videos. #3DPrinting
Dear #maker lazyweb - is there such a thing as a "friction bearing"? Something like a regular ballrace bearing but which provides X amount of resistance before starting to move? I feel like there's a whole range of little mechanical doodads I could make if only I could add a measurable amount of "stay where I put it" to each joint. Something bidirectional so it couldn't just ratchet in one direction. I've done armature wire with ball-and-socket joints before, looking for other options.
Miso soup implies the existence of mosi soup and clock soup
Hey #Canberra / #Australia generally, are you hiring? I'm an application support guy with an interest in BA, and I want some new systems to learn in the new year. Any industry. My magic trick is learning your environment and your proprietary, home-grown apps at warp speed, then going to bat for my users in your sprints and in your CAB meetings. Can do office or remote, but I have adorable cats that like to join standups if I can WFH. #GetFediHired
Looks like it's entirely possible to literally just load up a mechanical pencil with lengths of solder: https://www.instructables.com/Mechanical-Pencil-Solder-Loader/
Ideally I'd want something with a little continuous servo that rolled it in and out on demand at the push of a button, but I don't think I have time to design and build that at the moment.
Actually, is that a thing that exists? Like a mechanical pencil but for solder, so I can evenly feed it into a workpiece without putting my fingers near The Danger Zone? Bonus points if it's also USB powered and I can hold down a button to make a little gear whirr it out. Searching for "solder pump" gets me a lot of those desoldering suction things.
At least one other person has had this idea: https://www.reddit.com/r/mechanicalpencils/comments/1e630j5/solder_pen/
For plain through-hole soldering on a not-too-complicated board held in place on a flat surface, this thing would genuinely make it easier for *me*, nevermind someone who might otherwise have trouble holding a soldering iron. The jig takes away a surprising amount of brain noise about keeping the thing steady and safely out of the way when not actually doing the thing.
A second tower with some kind of solder-feeding stick would make it a very efficient task. Like having steady robot hands.
Ok, that's *almost* a whole NES adapter soldered together using a soldering iron in the para jig. It's not my best ever soldering job, and I had to go free-hand to join the two boards together (as the pins are very close to the plastic NES sockets), but overall that was at least as quick as doing it totally free-hand, and often easier (especially with the workpiece actually held in place).
The missing cut-off pins on top are an oversight of my order-of-operations and my 3D printed assembly jig.
Cable management - to keep the soldering iron's power cord safely out of the way. Here it's a little loose, but that's because the model was made for my bigger wall-plug soldering iron's cord - a USB-C-powered one will need tighter tolerances.
That said, those two blue bits were originally on my V1 mount built entirely from plasbeams - so that system being as versatile and universal as possible is already paying off, even in development.
And here's the angled soldering iron mount - it can be set to zero, 15, 30 or 45 degrees, and every hole goes right through so the mount can be used right- or left-handed in exactly the same way. Haven't tried using this yet but I'll build the next NES adapter with it.
Folks with an interest in #accessibility - what could I do to make this more useful/versatile? It already holds the soldering iron exactly wherever you move it in space but there'll be further improvements I can't fathom myself.
Left: The most accurately I could install threaded heat-set inserts freehand a couple of weeks ago. Right: What they look like when pressed into place using my parallelogram jig. I think the results speak for themselves.
You don't need to buy an expensive kit with heavy metal parts to accurately use heat-set inserts. Just some 3D printed bits and bobs that don't even need inserts to assemble - just screws.
If anyone in Australia thinks they'd like a kit of this thing, let me know.
Getting very close to a v1.0 of the heat-set insert jig. It's now properly mounted on a plasbeam base and proportioned neatly for the $20 IKEA Komplement shelf it sits on.
It's light enough to hold itself in place when you let go but I'll be adding some kind of safety clip to hold it upright when it's parked.
That Pinecil just friction fits in the holder (scroll up for that detail) and it can be modified for other soldering irons.
Watching a video where Adam Savage describes a project he put down and ignored for a while as "cooling its heels in the corner of my aesthetic vision" and now that's how I'm going to talk about everything I've ever started and not completed.
Unfinished projects aren't failures, they're just waiting for that lightning bolt of inspiration or creativity or knowledge to find their way to the conclusion of their journey. #maker
@mike about once a month I threaten that I'm going to retire early and go herd goats on the Isle of Man
The 3D printed soldering iron mount in prototype form. This camera stand is too high for its current length, it was just a convenient way to attach it to my desk.
It turns out chicago screws are a great way to make a hinge for a 3D print. This thing moves around naturally with almost no resistance at all, and once I get the proper length screws and washers involved this should be a very long-lasting mechanism. #3DPrinting
The soldering iron mount being held by two screws also means it'll be trivial to undo the top screw and swivel the mount so it's being held at an angle. That won't be useful for pressing threaded inserts into prints, but someone requested that as an accessibility feature to make actual regular soldering easier - this whole arrangement will make holding and manoeuvring the iron take much less force and energy.
The model below is just a quick sketch of that to get a feel for proportions.
Five iterations later, here's my mount for a Pinecil soldering iron.
The iron slots securely in place and is held by pressure on its rubber grip. Future cable management will stop it falling if it manages to wiggle out. It'll be mounted to the carriage by two M3 screws, so people with different irons can still use this system. Those screw mounts are chamfered, so it's self-centring and self-leveling on the carriage. And an inset arrow printed in a different colour makes the orientation obvious.
Modelling something in 3D is such a simple joy for me. It's the ultimate mastery of computing - to perfectly reproduce a physical object in the virtual world. This is the reason I own a quality digital caliper.
This is an accurate 3D model of the soldering iron I plan to use in my threaded insert jig. I could've just made this a couple of dull rectangular blocks, but this will help me orient and scale an actual thing within the space of a project, not just line up some dots and tick a box. #CAD
This is not permanent as I don't have long enough screws to hold it together, but this is already an unexpectedly pleasing object to handle. These beams have a 1x1cm cross-section and are absolutely rigid enough to keep the far ends parallel no matter what. This feels like the kind of thing you'd find in a classroom to demonstrate how geometry works.