It's currently 6 degrees outside and we'll drop to 3 overnight. In #Canberra.
It's the wrong November, Gromit!
Aussie gamer making new memories from the old. He/him. Writing from Ngunnawal/Ngambri land.
I built a giant Gravis GamePad and am working on USB adapters for old controllers. I beta-tested Secret Agent HD and UnDune2. I once made Toshiba mad at me over copyright. I post mostly #retrogaming, #3dprinting and #arduino stuff here.
Projects:
#Plasbeams
#Thrixels
#CGAPrints
#SerialStinger
#SimpleBreakouts
#SolderingStation
#GravisGamePad
It's currently 6 degrees outside and we'll drop to 3 overnight. In #Canberra.
It's the wrong November, Gromit!
A small but significant update to my heat-set insert press jig today, inspired by the parallelogram arm Marius Hornberger built to support his CNC machine's control panel.
Offsetting the link mounts allow the mechanism to fold flat - not only does this look neater, it will also make it trivial to design a magnet clip to safely lock the thing up and out of the way when not in use.
Obvious in hindsight but not something I came up with - this is why I watch all kinds of #maker videos. #3DPrinting
Dear #maker lazyweb - is there such a thing as a "friction bearing"? Something like a regular ballrace bearing but which provides X amount of resistance before starting to move? I feel like there's a whole range of little mechanical doodads I could make if only I could add a measurable amount of "stay where I put it" to each joint. Something bidirectional so it couldn't just ratchet in one direction. I've done armature wire with ball-and-socket joints before, looking for other options.
Miso soup implies the existence of mosi soup and clock soup
Hey #Canberra / #Australia generally, are you hiring? I'm an application support guy with an interest in BA, and I want some new systems to learn in the new year. Any industry. My magic trick is learning your environment and your proprietary, home-grown apps at warp speed, then going to bat for my users in your sprints and in your CAB meetings. Can do office or remote, but I have adorable cats that like to join standups if I can WFH. #GetFediHired
Looks like it's entirely possible to literally just load up a mechanical pencil with lengths of solder: https://www.instructables.com/Mechanical-Pencil-Solder-Loader/
Ideally I'd want something with a little continuous servo that rolled it in and out on demand at the push of a button, but I don't think I have time to design and build that at the moment.
Actually, is that a thing that exists? Like a mechanical pencil but for solder, so I can evenly feed it into a workpiece without putting my fingers near The Danger Zone? Bonus points if it's also USB powered and I can hold down a button to make a little gear whirr it out. Searching for "solder pump" gets me a lot of those desoldering suction things.
At least one other person has had this idea: https://www.reddit.com/r/mechanicalpencils/comments/1e630j5/solder_pen/
For plain through-hole soldering on a not-too-complicated board held in place on a flat surface, this thing would genuinely make it easier for *me*, nevermind someone who might otherwise have trouble holding a soldering iron. The jig takes away a surprising amount of brain noise about keeping the thing steady and safely out of the way when not actually doing the thing.
A second tower with some kind of solder-feeding stick would make it a very efficient task. Like having steady robot hands.
Ok, that's *almost* a whole NES adapter soldered together using a soldering iron in the para jig. It's not my best ever soldering job, and I had to go free-hand to join the two boards together (as the pins are very close to the plastic NES sockets), but overall that was at least as quick as doing it totally free-hand, and often easier (especially with the workpiece actually held in place).
The missing cut-off pins on top are an oversight of my order-of-operations and my 3D printed assembly jig.
Cable management - to keep the soldering iron's power cord safely out of the way. Here it's a little loose, but that's because the model was made for my bigger wall-plug soldering iron's cord - a USB-C-powered one will need tighter tolerances.
That said, those two blue bits were originally on my V1 mount built entirely from plasbeams - so that system being as versatile and universal as possible is already paying off, even in development.